Haynes Hastelloy C276 Plate

1.Standard: ASTM B575, ASTM B333, ASTM B906
2.Width: 0~2500mm or as per your requirements
3.Length: 0~12m or as per your requirements
4.Thickness: 0.3~ 200mm or as per your requirements

Send Inquiry

Product Introduction

Haynes Hastelloy C276 plate comprised of nickel, molybdenum, and chromium, this alloy offers exceptional resistance to a wide array of corrosive environments, including oxidizing and reducing conditions. ASME SB 575 UNS N10276 sheet adds tungsten and cobalt, it further enhances its resistance to crevice corrosion and stress corrosion cracking, ensuring longevity even in the harshest operating conditions. Usually used in chemical industry, petrochemical industry, marine engineering, nuclear industry and other fields.

Haynes Hastelloy C276 Plate Applications:

Chemical Processing
Oil and Gas Industry
Pulp and Paper Production
Power Generation
Aerospace and Defense

ASTM B575 Haynes C276 Plate Sheet Strip Specifications

Product Type	Hastelloy C276 ASTM B575 Sheet, Alloy C276 ASTM B575 Plate
Specification	ASTM B575 / ASME SB575
Tolerances (width / thickness)	EN 10258/ DIN 59381)EN 10151 2.4819 Hastelloy C-276 Strips EN 10088 Hastelloy C276 SB575 strips
Dimensions	Cold rolled Alloy C276 Plates 0.5-6.4 mm Hot rolled Alloy C276 Plates 3.0–10.0 mm
Thickness	0.1 to 100 mm
Width	10-2500mm
Length	2m, 2.44m, 3m, or as per you require
Surface treatment	SATIN, 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled, 1D, No.4, BA, 8K, hairline, brush, mirror etc.
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard
variety of shapes	Coils, Foils, Plates, Sheet, Strip, Plain Sheet, Checker Plates, Rolling Sheet, Flats, Clad Plates, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), Rolling Plates, Flat Shim, soft annealed, descaled, tread Plates, sheared, annealed

Hastelloy C276 Hot Rolled Plates Mechanical & Physical Properties

Density	8.89 g/cm³
Melting Point	1370 °C (2550 °F)
Tensile Strength	Psi – 1,15,000 , MPa –790
Yield Strength (0.2%Offset)	Psi – 52,000 , MPa – 355
Elongation	40%

Haynes C276 High Temperature Resistance

Haynes International C276 alloy has excellent high temperature properties with a melting point of approximately 1,370°C (2,498°F). EN 2.4819 maintains its mechanical properties and corrosion resistance in high temperature environments and is typically used in applications with long-term operating temperatures up to 1,090°C (2,000°F).