-
Nov 11, 2026DN to Inch Conversion Chart: DN6 to DN3000, With the Rule Behind Every RowDN to Inch Conversion Chart: DN6 to DN3000, With the Rule Behind Every Row DN25 is one inch. DN50 is two inches. DN100 is four inches. Almost every engineer knows those three by he -
Nov 10, 2026321 and 321H (UNS S32100 / S32109): The Titanium That Wins the Race Against C...321 and 321H stainless pipe: TiC stabilization vs chromium carbide sensitization, the 5xC rule, 321 vs 321H creep split, 321 vs 347, ER347 welding, and Ti/C certificate checks. -
Nov 09, 2026Inconel 600 vs 625 Plate: What the Extra Molybdenum and Niobium Actually BuyInconel 600 vs 625 plate: chemistry, B168 mechanical minimums, yield-driven thickness reduction, cost per square metre, corrosion boundaries, welding fillers and a decision table. -
Nov 06, 2026317L (UNS S31703): The 3.5% Molybdenum Stainless That Owns the Bleach Plant317L (UNS S31703) stainless pipe: 3.0-4.0% Mo, PREN 31-33 vs 316L PREN 25, 515/205 MPa, bleach plant crevice corrosion, ER317L welding, 317 vs 317L vs 317LN procurement trap. -
Nov 06, 2026310S vs 310H Plate: Five Numbers That Decide Which One You Order310S vs 310H plate: identical A240 room-temperature minimums, different carbon ranges. Five numbers on dual certification, creep allowable, thickness and cost, sensitization, and o -
Nov 05, 2026Inconel 625 (UNS N06625): Two Grades, One Alloy, and the Niobium That Makes I...Inconel 625 (UNS N06625): niobium gamma-double-prime strengthening, B444 Grade 1 vs Grade 2, 982C stabilization, -196C to 980C envelope, welding dilution, sizes and FAQ. -
Nov 04, 2026253MA (UNS S30815, 1.4835): What 0.05% Cerium Does for a Heat-Resistant Stain...253MA (UNS S30815, 1.4835) heat-resistant stainless: 0.05% cerium oxide-film mechanism, 1.6% silicon, 0.17% nitrogen. 600 MPa tensile, 1050C service, welding notes and FAQ. -
Nov 03, 2026Prefabricated Pipe Spools: The Shop-Fabricated Piping Package, Standards and ...Prefabricated pipe spools: shop-welded straight, elbow, reducer, tee and valve spools. Material standards per component, ASME B31.3 tolerance budgets, filler selection, indicative -
Nov 02, 2026Hastelloy C-22 (UNS N06022): The Alloy That Refuses to Pick a Side Between Ox...Complete Hastelloy C-22 (UNS N06022, 2.4602) guide: Ni-Cr-Mo-W chemistry, B622 pipe properties, corrosion map for oxidizing and reducing acids, wet chlorine, ASTM standards, weldin -
Oct 30, 2026Inconel 600 Plate or Inconel 625 Plate: Which One Do You Actually Pay For?Inconel 600 and 625 plate weigh almost the same, yet cost far apart. See the yield-strength math, per-m² cost comparison, ASTM B168 specs, and when 600 plate is honestly enough. -
Oct 30, 2026904L vs 254SMO: The Two Steps on the Chloride Ladder That Decide Seawater Ser...904L vs 254SMO comparison: chemistry, PREN (34-38 vs 42-46), mechanical data, standards (B673 vs A312), welding notes and the decision rule for seawater and chloride service. -
Oct 29, 2026Incoloy 825 (UNS N08825): The Most Underrated Nickel Alloy in Chemical ServiceComplete Incoloy 825 (UNS N08825, 2.4858) guide: chemistry and element roles, annealed mechanical properties, corrosion map for sulfuric and phosphoric acid and chlorides, ASTM B42
