Feb 26, 2024 Leave a message

ASTM B407 Standard for Nickel-Iron-Chromium Alloy Pipe

Introduction to ASTM B407:
ASTM B407 is a specification established by the American Society for Testing and Materials (ASTM) that outlines the requirements for seamless and welded nickel-iron-chromium alloy pipes. These pipes are designed to meet specific industrial needs where corrosion resistance, high-temperature strength, and durability are paramount.

 

Alloy Grades Covered by ASTM B407:
ASTM B407 encompasses various grades of nickel-iron-chromium alloys, including but not limited to:
1. Alloy N08800 (Incoloy 800)
2. Alloy N08810 (Incoloy 800H)
3. Alloy N08811 (Incoloy 800HT)

 

Material Characteristics:

  • Corrosion Resistance: These alloys display remarkable resistance to corrosion, particularly in environments containing sulfuric acid, nitric acid, and other corrosive chemicals.
  • High-Temperature Strength: ASTM B407 alloys retain their mechanical properties at elevated temperatures, making them ideal for applications involving heat exchangers, furnace components, and thermal processing equipment.
  • Oxidation Resistance: The alloys exhibit excellent resistance to oxidation, ensuring prolonged service life in high-temperature applications.

 

Mechanical Properties of ASTM B407 Pipe and Tube

Alloy Condition (Temper) Tensile Strength
min psi (MPa)
Yield Strength (0.2 % offset) min psi (MPa) Elongation in 2 in. or 50mm (or 4D),
min,%
UNS N08120 hot-finished annealed or cold-worked annealed 90 000 (621) 40 000 (276) 30
UNS N08800 cold-worked annealed 75 000 (520) 30 000 (205) 30
UNS N08800 hot-finished annealed or hot-finished 65 000 (450) 25 000 (170) 30
UNS N08810 and UNS N08811 hot-finished annealed or cold-worked annealed 65 000 (450) 25 000 (170) 30
UNS N08801 hot-finished annealed or cold-worked annealed 65 000 (450) 25 000 (170) 30
UNS N08890 hot-finished annealed or cold-worked annealed 75 000 (520) 30 000 (205) 35
UNS N06811 hot-finished annealed or cold-worked annealed 85 000 (585) 35 000 (240) 30

 

Main ASTM B407 Stainless Steel Applications:
ASME SB 407 nickel-iron-chromium alloy pipes find extensive use across various industries, including:

  • Chemical Processing: for handling corrosive chemicals and acids.
  • Petrochemical Industry: for piping systems in refineries and offshore platforms.
  • Power Generation: for boiler tubes, heat exchangers, and steam generator components.
  • Aerospace: for aircraft engine components and exhaust systems.
  • Industrial Furnaces: for conveying hot gases and fluids in heat treatment processes.

 

Quality Control Measures During Production:
Manufacturers adhere to stringent quality control measures during the production of ASTM B407 seamless pipes, ensuring compliance with the specification requirements. Key quality control processes include:

  • Chemical Composition Analysis: Verifying the elemental composition to meet specified ranges.
  • Mechanical Testing: Conducting tests such as tensile, hardness, and impact tests to assess mechanical properties.
  • Dimensional Inspection: Ensuring precise outer diameter, wall thickness, and length according to specified tolerances.
  • Non-Destructive Testing (NDT): Utilizing methods like ultrasonic testing and eddy current testing to detect surface and subsurface defects.
  • Hydrostatic Testing: Subjecting pipes to hydraulic pressure to assess their integrity under operating conditions.
  • Visual Inspection: Examining surface finish, weld integrity, and overall appearance to ensure quality and aesthetics.

 

Permissible Variations Tolerance in Outside and Inside Diameter and Wall Thickness

Specified Outside Diameter or Calculated
Nominal Outside Diameter (When Ordered to
Inside Diameter and
Average Wall)
Permissible Variations
Outside Diameter or Inside Diameter Wall Thickness %
+ - + -
Cold-Finished Pipe and Tube
Inches
0.500 to 5/8 , excl 0.005 0.005 15 15
5/8 to 11/2 , incl 0.0075 0.0075 10 10
Over 11/2 to 31/2 , incl 0.01 0.01 10 10
Over 31/2 to 41/2 , incl 0.015 0.015 10 10
Over 41/2 to 6, incl 0.02 0.02 12.5 12.5
Over 6 to 65/8 , incl 0.025 0.025 12.5 12.5
Millimetres
12.7 to 15.8, excl 0.127 0.127 15 15
15.8 to 38.1, incl 0.19 0.19 10 10
Over 38.1 to 88.9, incl 0.254 0.254 10 10
Over 88.9 to 114.3, incl 0.381 0.381 10 10
Over 114.3 to 152.4, incl 0.508 0.508 12.5 12.5
Over 152.4 to 168.3, incl 0.635 0.635 12.5 12.5
Hot-Finished Tube
Inches
21/2 to 51/2 , excl 0.031 0.031 12.5 12.5
51/2 to 91/4 , incl 0.047 0.047 12.5 12.5
Millimetres
63.5 to 139.7, excl 0.787 0.787 12.5 12.5
139.7 to 234.9, incl 1.19 1.19 12.5 12.5

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry