Monel K500 and Inconel 718 are two different nickel-based alloys, both of which offer high levels of strength and corrosion resistance under extreme conditions. But Monel alloy K500 has better fatigue properties, while Inconel alloy 718 has better creep resistance at higher temperatures. Additionally, Monel K500 is more malleable than Inconel 718, making it easier to use in some situations.
Monel K500 Vs. Inconel 718
1. Composition:
Monel K500 Pipe: Monel K500 UNS N05500 is a nickel-copper alloy with small amounts of aluminum and titanium added. It is composed primarily of approximately 63% nickel, 30% copper, 2.7% aluminum, and 2.3% titanium, with trace amounts of other elements.
Inconel 718 Pipe: Inconel 718 UNS N07718 is a nickel-based superalloy consisting of approximately 53% nickel, 19% chromium, 5% niobium (columbium), 3% molybdenum, 0.9% titanium, and small amounts of other elements such as iron, aluminum, and cobalt.
2. Temperature resistance:
Alloy K500: Nickel alloy K500 is typically used at temperatures below 550°C (1022°F). 2.4375 alloy k500 offers good strength and corrosion resistance, making it suitable for use in marine environments and chemical processing applications.
Alloy 718: Nickel alloy 718 is known for its excellent high-temperature strength and resistance to corrosion and oxidation. 2.4668 Inconel 718 is designed to maintain its mechanical properties at temperatures up to 704°C (1300°F).
3. Tensile strength
Monel K500 tensile strength: Nickel Monel K500 tensile strength typically ranges from 550MPa (80,000 psi) to 690MPa (100,000 psi). This makes Monel K500 suitable for use in many structural components such as bearings, springs, and bolts in marine and chemical applications.
Tensile strength of Inconel 718: Nickel Inconel 718 is a high-strength nickel-based alloy. The tensile strength of Inconel 718 can reach between 965MPa (140,000 psi) and 1035MPa (150,000 psi). Making AMS 5589 Inconel 718 very suitable for use in high-temperature and high-stress environments, such as aerospace engine components and applications in the nuclear industry.
Quick Comparison: Monel K500 vs. Inconel 718
| Technical Property | Monel K500 (UNS N05500 / 2.4375) | Inconel 718 (UNS N07718 / 2.4668) |
| Alloy Family | Nickel-Copper (Ni-Cu) | Nickel-Chromium-Molybdenum (Ni-Cr-Mo) |
| Max Service Temperature | ~480°C to 550°C (900°F to 1022°F) | Up to 650°C to 704°C (1200°F to 1300°F) |
| Tensile Strength (Aged) | 960 – 1100+ MPa (140 – 160+ ksi) | 1240 – 1400+ MPa (180 – 205+ ksi) |
| Yield Strength 0.2% (Aged) | 690 – 860+ MPa (100 – 125+ ksi) | 1030 – 1170+ MPa (150 – 170+ ksi) |
| Magnetic Permeability | Non-magnetic down to -100°C (-150°F) | Non-magnetic (mild response depending on aging) |
| Primary Corrosion Strengths | Seawater, hydrofluoric acid, alkalis, brine | Oxidizing environments, organic acids, H2S sour gas |
Typical Industry Applications
Where to Use Monel K500:
Marine propeller shafts, pump shafts, and impeller shafts
Non-magnetic oilwell drilling tools and collar sleeves
Valve stems, doctor blades, and scrapers in paper production
Marine fasteners, springs, and submarine components
Where to Use Inconel 718:
Aerospace gas turbine engine components (disks, blades, casings)
High-strength sour gas (H_2S) downhole tools & API 6A valves
Cryogenic storage vessel bolting and fasteners
Nuclear reactor components and rocket engine parts
Factory Supply Scope: Monel K500 & Inconel 718 Products
As a dedicated manufacturer and global exporter of nickel alloy piping products, Zhengzhou Huitong Pipeline Equipment Co., Ltd. supplies Monel K500 and Inconel 718 across various product forms:
Pipes & Tubes: Seamless & Welded Pipes (ASTM B165 / B829 / ASTM B444 / B705).
Flanges & Fittings: ASME B16.5 Weld Neck, Slip-On, Blind Flanges & ASME B16.11 Forged Socket Weld / Threaded Fittings.
Round Bars & Forgings: Age-hardened or annealed round bars, forged rings, and shafts (ASTM B865 / ASTM B637).
Plates & Sheets: Cold-rolled and hot-rolled alloy sheets (ASTM B127 / ASTM B670).
Quality Assurance & Testing
All shipments include complete material traceability:
EN 10204 3.1 Mill Test Certificate (MTC)
Positive Material Identification (PMI Testing)
Hardness Testing, Tensile Testing & NDT (UT/PT) upon request
Third-Party Inspection (TPI) by SGS, Bureau Veritas, or TÜV available
Need Technical Support or a Fast Quote?
Whether you need advice on selecting between UNS N05500 and UNS N07718 or require competitive pricing for an upcoming project, our engineering team is here to assist.
Email Inquiry: market@htpipe.com
Phone / WhatsApp: +86-19339900201
Service: Technical Consultation & Quotations within 24 hours.





