What is the Thickness Of 2 Inch Stainless Steel Pipe?

WT of 2-Inch Stainless Steel Pipe

The thickness of a 2-inch stainless steel pipe can vary depending on the schedule or wall thickness classification. In the United States, stainless steel pipe thickness is commonly specified using a system known as pipe schedules. The most common schedules for stainless steel pipe are Schedule 5S, Schedule 10S, Schedule 40S, Schedule 80S, and Schedule 160S.

Typical Wall Thicknesses For A 2-inch Stainless Steel Pipe:

1. Schedule 5S: Approximately 0.065 inches (1.65 millimeters)
2. Schedule 10S: Approximately 0.109 inches (2.77 millimeters)
3. Schedule 40S: Approximately 0.154 inches (3.91 millimeters)
4. Schedule 80S: Approximately 0.218 inches (5.54 millimeters)
5. Schedule 160S: Approximately 0.344inches (8.74 millimeters)

Stainless Steel Pipe Sizes And Dimensions(ASME ANSI B36.19)

DN	NPS	OD		Sch5S		Sch10S		Sch40S		Sch80S		Sch160S
DN	NPS	in	mm	in	mm	in	mm	in	mm	in	mm	in	mm
6	1/8	0.405	10.3			0.049	1.24	0.068	1.73	0.095	2.41	0.124	3.15
8	1/4	0.54	13.7			0.065	1.65	0.088	2.24	0.119	3.02	0.145	3.68
10	3/8	0.675	17.1			0.065	1.65	0.091	2.31	0.126	3.2	0.158	4.01
15	1/2	0.84	21.3	0.065	1.65	0.083	2.11	0.109	2.77	0.147	3.73	0.188	4.78
20	3/4	1.05	26.7	0.065	1.65	0.083	2.11	0.113	2.87	0.154	3.91	0.219	5.56
25	1	1.315	33.4	0.065	1.65	0.109	2.77	0.133	3.38	0.179	4.55	0.250	6.35
32	1 1/4	1.66	42.2	0.065	1.65	0.109	2.77	0.140	3.56	0.191	4.85	0.250	6.35
40	1 1/2	1.9	48.3	0.065	1.65	0.109	2.77	0.145	3.68	0.2	5.08	0.281	7.14
50	2	2.375	60.3	0.065	1.65	0.109	2.77	0.154	3.91	0.218	5.54	0.344	8.74
65	2 1/2	2.875	73	0.083	2.11	0.12	3.05	0.203	5.16	0.276	7.01	0.375	9.52
80	3	3.5	88.9	0.083	2.11	0.12	3.05	0.216	5.49	0.3	7.62	0.438	11.13
90	3 1/2	4	101.6	0.083	2.11	0.12	3.05	0.226	5.74	0.318	8.08
100	4	4.5	114.3	0.083	2.11	0.12	3.05	0.237	6.02	0.337	8.56	0.531	13.49
125	5	5.563	141.3	0.109	2.77	0.13	3.4	0.258	6.55	0.375	9.52	0.625	15.88
150	6	6.625	168.3	0.109	2.77	0.13	3.4	0.280	7.11	0.432	10.97	0.719	18.26
200	8	8.625	219.1	0.109	2.77	0.148	3.76	0.322	8.18	0.5	12.7
250	10	10.75	273.1	0.134	3.4	0.165	4.19	0.365	9.27	0.5	12.7
300	12	12.75	323.9	0.156	3.96	0.18	4.57	0.375	9.52	0.5	12.7

It's important to note that these are approximate values, and actual thicknesses may vary slightly depending on the specific manufacturing standards and tolerances. When specifying or selecting a stainless steel pipe, it's crucial to consider the intended application and any requirements for pressure, temperature, and corrosion resistance.