Nickel 200 Plate Sheet

1. Material grade: ASTM B162, ASME SB 162
2. Width: 1000~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.5~ 50mm or as per your requirements

Send Inquiry

Product Introduction

Nickel 200 Plate Sheet is a low -carbon nickel alloy metal. ASTM B162 UNS N02200 Sheets are resistant to corrosion resistance in restore and neutrality and oxidation atmosphere. Nickel 200 boards provide some resistance to hydrochloric acid and sulfuric acid at a moderate temperature and concentration. High -tech. WNR 2.4066/ 2.4060 has excellent anti -rigid alkali. You can customize according to the specific needs of our respectable customers, according to the size, specifications and thickness.

ASTM B162 UNS N02200 Standard and Suppliers

ASTM B162: Standard Specification for Nickel Plate, Sheet, and Strip

Nickel 200 Suppliers: We stock and produce Nickel 200 Plate, pipe, sheet, tube, ASTM B160 UNS N02200 bar, fitting , flange, welding wire, pipe spools.

Nickel 200 Plate Sheet Specifications

Specification	ASTM B162 UNS N02200, ASME SB162, MSRR, AMS, BS
Sizes	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 100 mm Thk
Width	10-2500mm
Length	2m, 2.44m, 3m, or as required
Nickel 200 Sheet ASTM	ASTM B162
Ni 200 Sheet AMS	AMS 5553
Plate Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of	Ni 200 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material	JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc

Pure Ni Alloy 200 Sheet Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel Alloy 200 Plate Mechanical Properties

Product Form	Condition	Tensile (ksi)	.2% Yield (ksi)	Elongation (%)	Hardness (HRB)
Plate	Hot-Rolled / Annealed	55-80	15-40	60-40	45-75
Sheet	Annealed	55-75	15-30	55-40	70 max

ASME SB 162 Alloy 200 Shim Sheet, Plate & Foil Difference

Thickness less than 0.15mm is called a Nickel 200 Foil.
Thickness greater than 6.35 mm is called a Nickel 200 Plate.
Thickness greater than 0.15 mm and less than 6.35mm is called a Nickel 200 Sheet.