Nickel 201 Plate Sheet

1. Material grade: ASTM B162, ASME SB 162
2. Width: 1000~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.5~ 50mm or as per your requirements

Send Inquiry

Product Introduction

Nickel 201 Plate Sheet is a commercially pure wrought nickel grade with a high nickel content. The low carbon content of N02201 material makes it highly resistant to intergranular corrosion caused by sensitization during welding or heat treatment. In addition, Alloy 201 has excellent resistance to acids, including sulfuric, hydrochloric and phosphoric acids, as well as alkaline solutions. The melting point of pure Nickel 201 plate is between 1435 and 1446 ℃. Cost-effective and customizable, we are a nickel alloy supplier with 15+ export experience, contact us | market@htpipe.com for more information and free quotes!

ASME SB162 Alloy 201 Sheets Standards：

ASTM B162: Standard Specification for Nickel Plate, Sheet, and Strip

Nickel 201 Suppliers: We stock and produce Nickel 201 Plate, pipe, sheet, tube, ASTM B160 UNS N02200 bar, fitting , flange, welding wire, pipe spools.

Nickel 201 Price: sheet price manufacturer:$15.00 - 30.00, prices are fluctuating as per market

Nickel 201 Plate Sheet Specifications

Specification	ASTM B162 UNS N02201, ASME SB 162, AMS 5553, MSRR, AMS, BS
Sizes (mm)	1000 x 2000, 1220 x 2440, 1500 x 3000, 2000 x 2000, 2000 x 4000
Thickness	0.1 to 100 mm Thk
Width	10-2500mm
Length	2m, 2.44m, 3m, or as required
AMS	AMS 5553
Plate Finish	HR, CR, 2B, 2D, BA, NO(8), SATIN
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of	Blank, cold-rolled, Sheet, Foils, Flat, Coils, hot-rolled, Clad, annealed, Strip, descaled, Tread, soft-annealed, Flats, Rolls, sheared, Shim, Checker, Rolling, Circle, Plate,

Contact now

Din 2.4060/ 2.4066 Cold Rolled Sheet Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel 201 UNS N02201 Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %