ASTM B575 UNS N10276 Plate

1. Standard: ASTM B575, ASME SB 575
2. Width: 0~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.3~ 200mm or as per your requirements

Send Inquiry

Product Introduction

ASTM B575 UNS N10276 Plate refers to Hastelloy C-276 plate manufactured to ASTM B575 specifications. C276 nickel alloy is known for its excellent corrosion resistance, especially in strong acids, alkalis, and high-temperature environments. hastelloy c276 sheet is commonly used in a variety of industrial applications in corrosive environments, including chemicals, oil and gas processing, pharmaceuticals, and other areas.

ASTM B575 UNS N10276 Plate Tests:

MTR (Material Test Report) EN10204
PMI Test reports
Chemical Analysis Tests
Tension Tests and hardness test
Yield strength Tests
Hydrostatic or Nondestructive Electric Tests
SGS third-party certification

Chemical Composition ASTM B575 N10276 Sheets:

Nickel (Ni): 50.99%
Molybdenum (Mo): 15.50%
Chromium (Cr): 14.50%
Iron (Fe): 4.00%
Tungsten (W): 3.70%
Manganese (Mn): 1.00%
Vanadium (Vanadium, V): 0.35%
Silicon (Si): 0.08%
Selenium (Se): 0.010%
Sulfur (S): 0.03%
Carbon (C): 0.01%

Haynes Hastelloy C276 Mechanical Properties:

Yield Strength	Approximately 41,000 psi (approximately 283 MPa)
Tensile Strength	Approximately 100,000 psi (approximately 690 MPa)
Elongation	about 40%
Hardness	HRB 100-120

ASTM B575 Specification

ASTM B575 specification covers low carbon nickel-chromium-molybdenum alloy (UNS N10276, N06022, N06455, N06035, UNS N06058, UNS N06059) plate, sheet and strip, low carbon nickel-chromium-molybdenum-copper alloy (UNS N06200), etc.

ASME SB 575 N10276 Plate Suppliers

Hastelloy C276 material provided by our suppliers strictly meets the required chemical composition of molybdenum, chromium, iron, tungsten, cobalt, carbon, silicon, manganese, vanadium, phosphorus, sulfur, titanium, nickel, aluminum, copper and tantalum. Including tensile strength, yield strength, elongation and Rockwell hardness, etc.

Products Types ASME SB575 Specification:

Sheet and Strip: Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
Plate: Hot or cold rolled, solution annealed, and descaled.