Alloy 31 s32750 material supplier. Contact us to get free quote and sample!
Alloy 31 (UNS N08031) and 2507 super duplex stainless steel (UNS S32750) are often the ultimate choices for engineers. Alloy 31 pursues extreme corrosion resistance in single-phase austenite with ultra-high nickel, chromium and molybdenum content, while 2507 achieves a balance of ultra-high strength and corrosion resistance on an iron matrix through nitrogen alloying of the duplex structure.
Alloy 31 s32750 material supplier
HT PIPE is a leading stockist and global exporter with over 15 years of expertise in international trade. We supply pipes, astm b625 n08031 plates, astm a240 super duplex 2507 plate, round bars, and a comprehensive range of pipe fittings, flanges, and valves. Contact us now for free quotes and personalized product information.
alloy 31 and s32750 Corrosion Resistance comparison
General Corrosion Resistance
N08031: Excellent in H₂SO₄, H₃PO₄, organic acids (esp. contaminated). Superior HCl resistance vs. most SS/Ni alloys.
2507: Excellent in oxidizing acids (e.g., HNO₃). Limited in HCl; Moderate H₂SO₄ resistance.
Localized Corrosion Resistance
Alloy 31: PREN ≥ 43. Top-tier pitting/crevice resistance (hot chlorides, low pH). Excellent SCC resistance.
2507: PREN ≥ 42. Equally top-tier pitting/crevice resistance. Outstanding Cl⁻-SCC resistance.

Alloy 31 vs. 2507: Chemical Composition Comparison
| Element | Alloy 31 (UNS N08031) | 2507 (UNS S32750) |
|---|---|---|
| Nickel (Ni) | 30.0–32.0% | 6.0–8.0% |
| Chromium (Cr) | 26.0–28.0% | 24.0–26.0% |
| Molybdenum (Mo) | 6.0–7.0% | 3.0–4.0% |
| Copper (Cu) | 1.0–1.4% | ≤ 0.5% |
| Nitrogen (N) | 0.15–0.25% | 0.24–0.32% |
| Iron (Fe) | Balance | Balance |
| Manganese (Mn) | ≤ 2.0% | ≤ 1.2% |
| Silicon (Si) | ≤ 0.3% | ≤ 0.8% |
| Carbon (C) | ≤ 0.015% | ≤ 0.03% |
| Phosphorus (P) | ≤ 0.02% | ≤ 0.035% |
| Sulfur (S) | ≤ 0.01% | ≤ 0.02% |
| Tungsten (W) | – | – |
nickel alloy 31 vs 2507 Performance Comparison
| Property | Alloy 31 (N08031) | 2507 (S32750) |
|---|---|---|
| Mechanical Strength | YS (Rp0.2): ≥ 310 MPa; UTS (Rm): ≥ 650 MPa (Annealed) | YS (Rp0.2): ≥ 550 MPa; UTS (Rm): ≥ 800 MPa (Annealed) |
| Toughness/Ductility | Excellent (austenitic). High impact toughness, good cryogenic performance. | Good but lower than austenitics. Ductile-brittle transition exists. |
| Weldability | Good. Use matching filler (ERNiCrMo-11/12). Mind heat input. | Good. Use filler (ER2594). Strict interpass T control (<100°C). |
| Formability (Cold/Hot) | Austenitic. High work-hardening. Hot work with care. | High strength/hardness → difficult cold forming. Narrow hot-working range (950–1150°C). |
| Thermal Stability | Max service T: ~400–450°C (σ-phase risk above). | Max service T: ~300°C (Avoid 475°C embrittlement & σ-phase). |
| Cost | High (High Ni/Cr/Mo) | Significantly lower than Alloy 31 (Fe-based, low Ni). |
How to choose the suitable one?
Q: Faced with boiling concentrated sulfuric acid or highly concentrated hydrochloric acid?
A: Alloy 31 is your best choice.
Q: Designing ultra-high pressure vessels or large thin-walled structures?
A: The strength advantage of 2507 is irreplaceable.
Q: Is the medium high-temperature seawater or chlorinated oil and gas?
A: Both are good, and 2507 is cheaper.
Q: Operating temperature exceeds 300°C for a long time?
A: Use 2507 with caution, Alloy 31 is safer.
Q: Extremely sensitive to budget and working conditions allow?
A: 2507 provides top duplex steel performance.





