Inconel X750 Sheet Datasheet
Inconel X750 sheet is a high-temperature nickel-based alloy with excellent high-temperature strength, creep resistance, and corrosion resistance, making it suitable for a variety of high-temperature and extreme environment applications. AMS 5598 specifies the manufacturing and performance requirements for Inconel alloy x-750 to ensure its suitability for aerospace, petrochemical, energy, and other high-temperature applications.
AMS 5598F Standard
AMS5598F: 2019-04-11
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb (Nb) + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode, Remelted or Vacuum Induction Melted, Solution Heat Treated, Precipitation-Hardenable.
High-temperature Resistance:
AMS 5598 Inconel X750 can be used continuously at temperatures of approximately 700°C (1,292°F) and withstands temperatures of 1,000°C (1,832°F) or higher for short periods of time.
Mechanical Properties:
AMS 5598 specifies the minimum tensile strength requirements for the Inconel X750 sheet. Typically, its tensile strength is approximately 140,000 psi (965 MPa) or higher. yield strength exceeding 80,000 psi (550 MPa), Nickel Alloy x 750 can exhibit elongation values of 20% to 30%.
Magnetic:
Inconel X750 UNS N07750 Strip is non-magnetic at room temperature and remains non-magnetic at low temperatures, making it suitable for applications in magnetic environments.
Creep Resistance:
Inconel X750 sheet has good creep resistance, which means it can withstand constant stress and deformation at high temperatures for a long time without obvious deformation or failure.
Our company is a professional and reliable one-stop service manufacturer, supplier and exporter. We not only provide Inconel X750, but also alloy 600, 601, 625, Inconel 718 sheet, plate, pipe, tube, round bar. Free samples are available. Please contact us for a free quote.
