SS 304 Schedule 40 Pipe Thickness pipes varies with the nominal pipe size, typically ranging from 0.068" (1.73 mm) for small sizes to 0.500" (12.70 mm) for larger sizes. Stainless steel 304 (SS 304) is a widely used stainless steel grade known for its excellent corrosion resistance and good mechanical properties. Schedule 40 pipes are standard weight pipes, thicker than Schedule 10 pipes, and are commonly used in various industrial applications.
SS 304 Schedule 40 Pipe Thickness Chart (ASME B36.19)
The wall thickness of a Schedule 40 pipe varies depending on the nominal pipe size (NPS). Below is a table showing the wall thickness for SS 304 Schedule 40 pipes for various nominal pipe sizes:
| Nominal Pipe Size (NPS) | Outside Diameter (OD) | Wall Thickness (Schedule 40) |
|---|---|---|
| 1/8" | 0.405" (10.29 mm) | 0.068" (1.73 mm) |
| 1/4" | 0.540" (13.72 mm) | 0.088" (2.24 mm) |
| 3/8" | 0.675" (17.15 mm) | 0.091" (2.31 mm) |
| 1/2" | 0.840" (21.34 mm) | 0.109" (2.77 mm) |
| 3/4" | 1.050" (26.67 mm) | 0.113" (2.87 mm) |
| 1" | 1.315" (33.40 mm) | 0.133" (3.38 mm) |
| 1-1/4" | 1.660" (42.16 mm) | 0.140" (3.56 mm) |
| 1-1/2" | 1.900" (48.26 mm) | 0.145" (3.68 mm) |
| 2" | 2.375" (60.33 mm) | 0.154" (3.91 mm) |
| 2-1/2" | 2.875" (73.03 mm) | 0.203" (5.16 mm) |
| 3" | 3.500" (88.90 mm) | 0.216" (5.49 mm) |
| 3-1/2" | 4.000" (101.60 mm) | 0.226" (5.74 mm) |
| 4" | 4.500" (114.30 mm) | 0.237" (6.02 mm) |
| 5" | 5.563" (141.30 mm) | 0.258" (6.55 mm) |
| 6" | 6.625" (168.28 mm) | 0.280" (7.11 mm) |
| 8" | 8.625" (219.08 mm) | 0.322" (8.18 mm) |
| 10" | 10.750" (273.05 mm) | 0.365" (9.27 mm) |
| 12" | 12.750" (323.85 mm) | 0.375" (9.53 mm) |
| 14" | 14.000" (355.60 mm) | 0.375" (9.53 mm) |
| 16" | 16.000" (406.40 mm) | 0.375" (9.53 mm) |
| 18" | 18.000" (457.20 mm) | 0.375" (9.53 mm) |
| 20" | 20.000" (508.00 mm) | 0.375" (9.53 mm) |
| 24" | 24.000" (609.60 mm) | 0.500" (12.70 mm) |
How to Read a Schedule 40 Stainless Steel Pipe Dimensions Chart
A stainless steel pipe dimensions chart typically includes nominal pipe size, outside diameter, wall thickness, and sometimes inside diameter or theoretical weight.
Nominal Pipe Size (NPS) is a standardized size designation. It is not necessarily equal to the measured outside diameter. For example, NPS 2 stainless steel pipe has an outside diameter of 2.375 inches, or approximately 60.33 mm.
Outside Diameter (OD) is the external diameter of the pipe. It is important when checking pipe supports, fittings, connections, and dimensional compatibility.
Wall Thickness is the specified pipe-wall dimension associated with the selected size and schedule. It affects the inside diameter, weight, and pressure-design calculation.
Inside Diameter (ID) is determined by subtracting twice the wall thickness from the outside diameter:
ID = OD − 2 × wall thickness
For example, an NPS 2 Schedule 40S pipe has a nominal outside diameter of 60.33 mm and a listed wall thickness of 3.91 mm. Its nominal calculated inside diameter is approximately 52.51 mm.
This is a dimensional calculation, not a guarantee of the actual measured bore. Manufacturing tolerances and the actual delivered wall thickness can affect the final inside diameter.
Schedule 40 vs Schedule 40S: What Is the Difference?
Schedule 40 and Schedule 40S are related but distinct dimensional designations.
ASME B36.10M covers welded and seamless wrought steel pipe dimensions, while ASME B36.19M covers welded and seamless wrought stainless steel pipe dimensions. The "S" suffix identifies stainless steel schedule designations within B36.19M.
Some nominal sizes have the same wall thickness in Schedule 40 and Schedule 40S. Other sizes differ. Therefore, a chart labeled "Schedule 40" should not automatically be treated as a Schedule 40S chart for every nominal diameter.
For example, the NPS 12 Schedule 40S wall thickness commonly listed under ASME B36.19M is 0.375 inch (9.53 mm). The corresponding NPS 12 Schedule 40 dimension under ASME B36.10M is different.
This distinction is important when a project specification explicitly requires ASME B36.19M, Schedule 40S. A supplier should confirm the requested standard and schedule rather than relying on the general description "Schedule 40 stainless steel pipe."
Before purchasing, verify:
The governing dimensional standard.
The exact schedule designation.
The nominal pipe size and outside diameter.
The specified wall thickness.
The applicable material and manufacturing specification.
Correctly identifying the dimensional standard helps avoid mismatches between pipe, fittings, and project drawings.





