Jun 10, 2025 Leave a message

Stainless Steel SS 253ma Pipe Manufacturer

Stainless steel 253ma pipe manufacturer, supplier. Contact us to get free quote and sample!

 

253MA (UNS S30815, EN 1.4835) is a nickel-saving austenitic heat-resistant stainless steel. It exhibits excellent anti-oxidation, carburization and thermal corrosion resistance in a high temperature atmosphere below 1200℃. At the same time, the grain boundary structure is strengthened by nitrogen to effectively resist intergranular corrosion and creep failure at high temperatures.

 

Stainless steel 253ma pipe manufacturer, supplier

HT PIPE is a reputable supplier and exporter. Our inventory includes 253ma stainless steel pipes, plates, bars, alongside high-quality fittings, flanges, and fasteners. Reach out today for competitive pricing and detailed specifications-no obligation, just expert support.

 

SS 1.4835 Chemical composition 

Chromium (20%-22%) provides basic oxidation resistance, Nickel (10%-12%) stabilizes the austenite structure; Nitrogen (0.14%-0.20%) enhances creep strength, Rare earth cerium (0.03%-0.08%) cooperates with silicon to form a dense oxide film, raising the oxidation resistance temperature to 1150℃.

 

ss253ma

S30815 pipe High temperature strength and creep resistance

The tensile strength of 253ma steel pipe is more than 20% higher than that of 310S at 900℃. It is suitable for pressure-bearing occasions up to 900℃, and non-pressure-bearing parts (such as burner nozzles) can withstand 1150℃. Its high nitrogen content significantly improves creep rupture strength, and the deformation rate under long-term high temperature load is lower than that of traditional stainless steel.

 

alloy 253ma pipe Anti-oxidation and corrosion resistance

The chemical composition of rare earth cerium promotes the formation of a chromium-rich silicon oxide layer on the surface, which resists corrosion in sulfide, chloride and carburized environments. Although its pitting resistance equivalent (PREN) is not clearly marked, its actual performance is close to that of high-alloy steel, especially in chloride-containing media.

 

stainless steel S30815 pipe Mechanical and process properties

Room temperature tensile strength ≥600 MPa, yield strength ≥310 MPa, elongation ≥40%, with high toughness and cold processing feasibility. No preheating/post-heating is required for welding, and it is suitable for TIG/MIG processes. The supporting welding materials are ER385 or special 253MA welding wire.

 

Why Choose Us?

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • SGS Third Party Inspection Report, etc
  • Huge Stock, Timely delivery
  • Free Quote, Inquiry answered within 24 hours

Contact now

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry