Sep 04, 2023 Leave a message

ASME SB 163 UNS N04400 (Monel 400) Tube | HT PIPE

ASME SB 163 UNS N04400 seamless tube

ASME SB 163: ASME stands for the American Society of Mechanical Engineers, which develops and publishes standards for a variety of materials and processes. ASME SB 163 is the standard specification for seamless nickel and nickel alloy condenser and heat exchanger tubes.

 

UNS N04400: UNS N04400 is the name of a specific nickel-copper alloy, commonly known as Monel 400. Monel 400 UNS N04400 is composed primarily of nickel (approximately 67%) and copper (approximately 28%), with smaller amounts of other elements such as iron and manganese.

 

Key Performance Characteristics of UNS N04400

ASME SB 163 UNS N04400 (Monel 400) seamless tubing is specified across demanding industries due to its exceptional physical and metallurgical properties:

 

Superior Corrosion Resistance: Outstanding resistance to hydrofluoric acid, sulfuric acid, neutral and alkaline salt solutions, and rapidly flowing seawater.

Stress Corrosion Cracking Resistance: Virtually immune to chloride-induced stress corrosion cracking (SCC) under industrial operating conditions.

High Mechanical Integrity: Retains high strength and toughness across a broad temperature range, from sub-zero cryogenic levels up to 1000°F (538°C).

Seamless Integrity: Manufactured in strict accordance with ASME SB 163 tolerances to ensure uniform wall thickness and pressure resistance.

 

2. Chemical Composition Requirements

The exceptional corrosion resistance of ASME SB 163 UNS N04400 is derived from its high nickel and copper ratio. The chemistry must comply with the following boundaries:

Nickel (Ni): Minimum 63.0%

Copper (Cu): 28.0% to 34.0%

Iron (Fe): Maximum 2.5%

Manganese (Mn): Maximum 2.0%

Carbon (C): Maximum 0.3%

Silicon (Si): Maximum 0.5%

Sulfur (S): Maximum 0.024%

 

3. Mechanical & Physical Properties (Annealed Condition)

ASME SB 163 specifies minimum mechanical requirements for UNS N04400 tubes in the annealed temper:

Tensile Strength (Minimum): 70 ksi (485 MPa)

Yield Strength (0.2% Offset, Minimum): 28 ksi (195 MPa)

Elongation in 2 inches (Minimum): 35%

Density: 8.80 g/cm³ (0.318 lb/in³)

Melting Range: 2370°F to 2460°F (1300°C to 1350°C)

 

4. ASME SB 163 Standard Specifications & Equivalents

ASME SB 163 UNS N04400 seamless tubing aligns with major international piping standards:

Standard Organization Specification / Designation
ASME / ASTM Standard ASME SB 163 / ASTM B163
Unified Numbering System UNS N04400
Common Trade Name Monel 400
EN / DIN Standard EN 2.4360 / W.Nr. 2.4360
Equivalent Pipe Spec ASME SB 165 / ASTM B165

 

5. Primary Industrial Applications

ASME SB 163 UNS N04400 seamless condenser and heat exchanger tubes are extensively utilized in:

Marine Engineering: Seawater heat exchangers, cooling systems, and desalting equipment.

Chemical Processing: Alkylation units, hydrofluoric acid (HF) reboilers, and organic acid production systems.

Oil & Gas Extraction: Subsea heat exchange loops and sour gas handling tubing.

Power Generation: Boiler feedwater heaters and nuclear steam generator tubing.

 

Looking for Certified ASME SB 163 UNS N04400 Seamless Tubes?

Huitong Pipeline Equipment supplies fully certified ASME SB 163 UNS N04400 (Monel 400) seamless condenser and heat exchanger tubes complete with EN 10204 3.1 Mill Test Certificates (MTC), hydro-testing, and non-destructive eddy-current testing.

[Request a Fast Quote for ASME SB 163 UNS N04400 Tubes]

 

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry