Monel K500 Sheet

1. Standard: ASME SB127/ ASTM B127
2. Width: 0~2500mm
3. Length: 0~12m
4. Thickness: 0.1~ 12mm
5. Grades：Alloy K500, UNS N05500, WNR.2.4375

Send Inquiry

Product Introduction

Monel k500 sheet is a nickel-copper alloy with a nickel content of at least 63% and a copper content of at least 28%. Alloy k500 has a very high melting point of 1350 degrees Celsius and is suitable for high temperature applications. Monel k500 material is highly machinable and also has a strong resistance to oxidation, stress cracking, pitting and crevice corrosion attack. Our suppliers can provide ASME SB127 UNS N05500 hot-rolled and cold-rolled sheets. As well as thicker sheets and thinner sheets as well as coils and strips.

Application Areas of Nickel Alloy K500 Sheet:

Marine engineering: ships, seawater cooling systems and seawater treatment equipment.
Chemical industry
Oil and gas: including valves, pumps and pipes.
Aerospace: Aircraft parts and engine components.

2.4375 Monel K500 Sheet Specification:

Standard	ASME SB127/ ASTM B127
Hardness Available	Half Hard, Quarter Hard, Spring Hard, Hard, Soft, etc
Manufacturing sizes	1000 mm x 2000 mm, 1220 mm x 2440 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1500 mm x 3000 mm
Available Thickness	0.1 to 12 mm Thk
Finish	Cold rolled sheet (CR), BA NO(8), 2B, Hot rolled plates (HR), 2D, SATIN
Most Used Form	Rolls, Coils, Blank (Circle), Shim Sheet, Flats, Foils, Strip, Ring (Flange), Plain Sheet

Composition Chart of Alloy 500 UNS N05500

Grade	C	Mn	Si	S	Cu	Fe	Ni
Monel K500	0.25 max	1.5 max	0.5 max	0.010 max	27.00 – 33.00	0.5 – 2	63.00 min

Typical Room Temperature Tensile Properties of Annealed Material

Product Form	Condition	Tensile (ksi)	0.2% Yield (ksi)	Elongation %	Hardness
Plate	Hot-Finished / Aged	140-180	100-135	30-20	27-37 HRC
Sheet	Cold-Rolled / Annealed	90-105	40-65	45-25	85 HRB Max

ASTM B127 UNS N05500 Standard：

ASTM B127: Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

Monel K500 Suppliers and Manufacturers

Nickel Copper Alloy 500 complies with ASME SB127/ASTM B127 standards, ensuring its quality and performance reliability.
We stock and produce this grade of Monel K500 in the following forms: Bars, Tube Coils, Strip Coils, Sheets, Plates, Tubes, Pipes and Monel K500 Flanges.
If you are looking for high performance Nickel Copper Alloy Plates, please contact us for a free quote.