Monel 400 Sheet

1. Material grade: monel 400, UNS N04400, din 2.4360
2. Width: 0~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.1~ 100mm or as per your requirements

Send Inquiry

Product Introduction

Monel 400 sheet contains approximately 67% nickel and 28% copper, with the remaining 10% consisting of iron, manganese, and other trace elements. Nickel alloy 2.4360 sheet is highly corrosion resistant and can operate at temperatures up to 1000°F (538°C). ASTM B127 UNS N04400 is an ideal material for applications that require high strength, corrosion resistance, and resistance to stress corrosion cracking. As a result, Monel alloy 400 is widely used in shipbuilding, chemical, energy, electronics, and other industries.

400 Sheet Supplier ASTM Standard:

ASTM B127: Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

Suppliers: We stock and produce Monel 400 in this grade in the following forms: Monel 400 round bar, pipe spool, loose coil, sheet, plate, tube, pipe, and Monel 400 flanges.

Grades: Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Hastalloy C22, Hastalloy C276, Monel K500, Inconel 600, Inconel 601, etc.

Monel 400 Sheet Composition

Element	Content, %
Nickel [Ni]	≥63.0
Copper [Cu]	28.0~34.0
Iron [Fe]	≤2.50
Manganese [Mn]	≤2.00
Carbon [C]	≤0.30
Silicon [Si]	≤0.50
Sulfur [S]	≤0.24

Monel 400 Material Properties

Density: about 8.83 grams/cubic centimeter
Melting Point: about 1310°C (about 2390°F)
Strength (Tensile Strength): about 550-760 MPa (80,000-110,000 psi)
Yield Strength (Yield Strength): about 240-345 MPa (35,000-50,000 psi)
Elongation: about 40-60%
Hardness: Monel 400 sheet Rockwell B hardness is about 70-85

ASME SB 127 Monel Sheet & Plate Weight Chart

Thickness	Plate Weight per Unit Area	Density
3/16 inches	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

Manufacturers Forged Monel 400:

ASME SB 127 UNS N04400 can be processed into different product shapes through forging process. Forging is usually carried out at a temperature between about 870°C (about 1600°F) and 1200°C (about 2200°F) to ensure good plasticity. Forged Monel steel plates can be used to manufacture various parts, such as Monel 400 round bars, pipe shafts, pipes, tubes, Monel 400 flanges, valves, bearings, etc. We can provide these forms of products, contact us now !