Nov 18, 2026 Leave a message

Exported CL2500 RTJ Blind To Singapore

Zhengzhou Huitong Pipeline Co., Ltd. has successfully concluded an order for 46 blind spades covering three specification lines: two high-pressure Class 2500 RTJ items in A182 F316L stainless steel, and one large-diameter 18" Class 150 RF item in A516 Gr. 70 carbon steel. The package supports a refinery and terminal turnaround programme and will be supplied with full material traceability to EN 10204 3.1B.

 

Order at a Glance

Line Description Material Rating / Facing Standard Qty
1 Blind Spade 6" A182 Gr. F316L (CLJ51) CL2500, RTJ ASME B16.5 5 PC
2 Blind Spade 2" A182 Gr. F316L (CLJ51) CL2500, RTJ ASME B16.5 34 PC
3 Blind Spade 18" A516 Gr. 70 (or equivalent) CL150, RF ASME B16.5 7 PC

Manufacturer part number and manufacturer are designated as "NO SPECIFIC MANUFACTURER", so the items are supplied as fully interchangeable, standard-compliant parts rather than a proprietary brand - drawings, marking and data book follow the buyer's specification.

 

Technical Highlights

Class 2500 is the top of the ASME B16.5 pressure ladder.

The 2" and 6" blinds are machined from A182 F316L forgings with ring joint (RTJ) grooves; groove profile, width and depth are gauge-checked against the applicable R-ring number, with flatness and surface finish held to the standard's limits so the joint seals first time at hydrotest.

 

Forged stainless, fully traceable.

Each F316L forging carries a mill heat number, chemical and mechanical certification, and solution-annealing record; 100% positive material identification (PMI) is performed on finished parts before marking.

 

Large-diameter carbon steel blank.

The 18" A516 Gr. 70 blind, 150 RF, is rolled/forged to ASME B16.5 dimensions with raised-face finish, drilled to the standard bolt pattern and edge-marked for heat number, size, rating and material.

 

Consistent facing control across all three lines

The same dimensional inspection route (OD, thickness, bolt circle, raised face / groove) applies to stainless and carbon steel items, so site fit-up is repeatable regardless of line.

 

Approximate Weight and Dimensions

Line Qty Approx. OD (mm) Approx. Thickness (mm) Approx. Unit Weight (kg) Line Total (kg)
1 – 6" CL2500 RTJ F316L 5 ~305 ~145 ~80 ~400
2 – 2" CL2500 RTJ F316L 34 ~165 ~70 ~12 ~408
3 – 18" CL150 RF A516-70 7 ~660 ~45 ~60 ~420

 

Package total: approx. 1,230 kg net / approx. 1,400 kg gross, packed in ISPM 15 heat-treated wooden cases with desiccant and rust-preventive wrapping, suitable for ocean freight, with lifting and case markings per the packing list. Final weights and dimensions are confirmed on approved fabrication drawings and the pre-shipment packing list.

 

Commercial Terms

Lead time: approx. 30–35 working days after receipt of purchase order and drawing approval. The 18" A516 Gr. 70 blinds are scheduled in the first production block (approx. 20 working days) so partial shipment can be offered if the turnaround window tightens; the CL2500 forged items follow in the second block.

Price validity: 30 days from the date of quotation, with the current batch locked at order confirmation - protecting the client against alloy surcharge movement during the machining cycle.

Data sheet: the buyer's item data sheet is completed and returned with the offer (dimensions, facing, ring groove number, material grade, heat treatment condition, marking, coating) and re-issued at the end of manufacturing as part of the as-built data book.

Origin / shipping: Export packing and documents arranged by the company's export desk.

 

Certification and Documentation Requirements

Every item in this package is released against the following documentation set:

  • Material certificate to BS EN 10204-3.1B - heat-number traceable, covering chemical composition, mechanical properties and heat-treatment record for each forging / plate lot.
  • Mill test certificates from the original steelmaker for A182 F316L and A516 Gr. 70 stocks.
  • 100% PMI report on stainless items (alloy verification on finished parts).
  • Dimensional inspection report per ASME B16.5, plus RTJ groove profile and gauge inspection record for the 2" and 6" blinds.
  • Hardness verification report; NDT (UT/MT on forgings, PT where specified) as required by the buyer's specification.
  • Surface finish and preservation report, marking verification to MSS SP-25 / buyer's tagging scheme.
  • Packing list, certificate of origin, ISPM 15 fumigation certificate, and full data book issued in PDF plus hard copies.
  • Third-party inspection (TPI) at the buyer's nominated agency can be accommodated at the pre-shipment stage.

 

About Zhengzhou Huitong Pipeline Co., Ltd.

A China-based manufacturer and exporter of flanges, blind flanges, spectacle and spade blinds, pipe fittings and specialty alloy products in stainless steel, duplex, nickel alloys and carbon steel, supplied to refinery, petrochemical, power and terminal projects worldwide, with documentation packages to EN 10204 3.1 / 3.1B.

Contact now

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry