News

ASTM A312 SCH 40 316 stainless steel pipe, containing 16% chromium, 10% nickel, and 2% molybdenum, has excellent corrosion resistance and high-temperature stability. These pipes...

When cleaning the appearance of 304 stainless steel plate, we must pay attention to the scratches that do not attack the appearance

When using 304 stainless steel plate, if there are welding chips, cement, oil, white ash, putty, sand ash, etc.

304 stainless steel plate can not have grinding head print, grinding head print is a circle, is the 8K machine grinding head and equipment without contact with the mark left beh...

304 stainless steel plate transfer window during the use of the two doors, to keep in the closed state, there is an electrical lighting system transmission window, first plug in...

304 stainless steel plate Regarding the calculation formula of this passivation film, it should be noted that it will also isolate the metal from the outside world and protect t...

The selection of stainless steel plate should consider the operating conditions of use, such as manual operation or automatic operation, the performance and type of the heat pre...

The surface of stainless steel contains dust or heterogeneous metal particles containing other metal elements, in humid air, condensation between the adhesion and stainless steel

The total heat transfer coefficient of a metal depends on other factors in addition to the thermal conductivity of the metal. In most cases, the heat dissipation coefficient of ...

tainless steel plates have similar resistance to general corrosion as unstable nickel-chromium alloy 304.

The surface of stainless steel plate is smooth, has high plasticity, toughness and mechanical strength, and is resistant to corrosion of acids, alkaline gases, solutions and oth...

Blunt surface: NO.2D after cold rolling after heat treatment, pickling, its material is soft, the surface is silvery-white luster, used for deep drawing processing, such as auto...