Alloy 904L Steel Sheets

1. Standard: ASTM A240 / ASME SA240
2. Thickness: 0.3~100mm or as required
3. Width: 1000~2500mm or as required
4. Length: 0~12m or as required

Send Inquiry

Product Introduction

Alloy 904L Steel Sheets consists of nickel, chromium, molybdenum, copper and manganese. Nickel content ranges from 23% to 28% in the composition, and 4.5% of molybdenum, which has good resistance to chloride stress corrosion cracking, pitting and general corrosion resistance, better than 316L and 317L molybdenum reinforced stainless steels. In addition, due to the addition of copper, the material is resistant to weak acids, dilute sulfuric acid, etc. HT PIPE is a supplier and manufacturer of these sheets in different sizes, shapes and dimensions. Contact us for more information and free quotes!

SS 904l 1.4539 Plate Applications:

Refinery components
Gas scrubbing plants
Pulp and paper processing industry
Seawater cooling equipment
Chemical processing industry
Acetic, phosphoric and sulfuric acid processing plants

Specification of Stainless Steel 904L Sheets, Plates and Coil

Specifications	ASTM A240 / ASME SA240
Dimensional specification	JIS, AISI, ASTM, GB, DIN, EN, etc
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness	4mm-100mm
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish	2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc.
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finish	No.1, No.4, No.8 Mirror Finish, 2B