Alloy 825 Uns N08825 Plate
1. Material Grades: Incoloy 825, UNS N08825, W.NR. 2.4858
2. Width: 3.2~1500mm or as per your requirements
3. Thickness: 0.2~50mm or as per your requirements
4. Length: 0~12m or as per your requirements
Incoloy 825 nickel-based alloy plate is the ultimate solution verified by the global industry. This is for complex corrosion and high temperature conditions, providing reliable protection for key equipment for more than ten years. HT PIPE is a Incoloy N08825 Plate supplier with 15+ export experience. Contact us for more information and quotes for free!
Specification of Incoloy 825 Plates
Incoloy Plates Specification : ASTM B424 / ASME SB424
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 8000mm, etc
Thickness : 0.3 mm to 120 mm
Process: Hot rolled plate, Cold rolled sheet
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
inco 825 chemical composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Incoloy 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Grade 825 Incoloy ASTM B424 Sheets, Plates, Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30% |
alloy 825 plate Corrosion protection
- Chloride stress corrosion cracking (Cl-SCC) tolerance: the first choice for seawater pipelines on offshore platforms.
- Pitting/crevice corrosion resistance: the corrosion rate in stagnant seawater is as low as 0.003 mm/a, which is almost "immune".
- Acid and alkali environment: from boiling sulfuric acid, phosphoric acid to concentrated alkali solution (NaOH/KOH), the performance far exceeds that of 316L and other stainless steels.
n08825 material High temperature strength
It can serve for a long time at 550℃, has passed ASME boiler and pressure vessel certification, has a strength retention rate of over 80%, and has a creep rupture time of >5000 hours at 950℃, providing a "longevity gene" for high-temperature pipelines.
Application of no8825 material
Oil and gas: submarine pipelines, downhole tools for acid gas wells.
Chemical equipment: sulfuric acid reactors, phosphoric acid evaporators, pickling equipment.
Nuclear industry: containers and pipelines for nuclear waste treatment systems.
Marine engineering: seawater desalination devices, heat exchangers.
Environmental protection: key components of flue gas desulfurization (FGD) systems.
FAQ
Q: About Alloy 825 Plate prices?
A: Prices from ranges $30 - $35 per kilogram, vary depending on size, wall thickness, supplier etc.
Q: How long does your delivery time take?
A: Delivery time is within 5-21 days
Q: Is There Sample Service?
A: Samples Are Provided Free Of Charge
Q: What Is The Minimum Order Quantity?
A: No Minimum Order Quantity
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer and is fixed with a fumigation wooden pallet.
Q: Exported Countries
A: Brazil, South Africa, Indonesia, India, Singapore, Malaysia, Iran, Russia, UAE, Chile, Laos, etc
Q: Can we visit your factory?
A: Of course, you are always welcome!
Hot Tags: alloy 825 price, uns n08825, uns n08825 material manufacturers, incoloy 825 plate suppliers
Previous
Alloy 825 SheetYou Might Also Like
Send Inquiry