Inconel 600 Pipe

1. Standard: ASTM B163、ASTM B167、ASTM B474
2. Diameters: 4.0 - 1219.2 mm
3. Wall thickness: 0.5 to 20mm
4. Length: Single Random Length, Double Random Length and Customized
5. Grades：alloy 600,UNS N06600, en 2.4816

Send Inquiry

Product Introduction

Inconel 600 pipe is a chromium-nickel alloy. It has strong resistance to heat, corrosion and oxidation. It is designed for temperatures up to 2000°F and down to cryogenic levels. Nickel 600 pipe ranges from 4mm to 219mm (seamless pipe), 5 to 1219.2mm (welded pipe and EFW pipe). Alloy 600 seamless pipe is produced by cold rolling process with high dimensional accuracy. The material has a minimum yield strength of 310MPa and a minimum tensile strength of 655MPa.

ASME SB163 600 Pipe Material Standard:

ASTM B163: Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASTM B167: Standard Specification for Nickel- Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) Seamless Pipe and Tube, Etc.

ASTM B474: Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

Inconel 600 UNS N06600 Pipe Specifications

Specification	ASTM B167, ASTM B829, ASTM B775, ASTM B517, ASTM B516, ASTM B163, ASTM B751, AMS 5580
Standard	ASME, ASTM, AISI, AMS, JIS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Seamless pipe	OD: 4 - 219mm
Seamless pipe	Wall Thickness: 0.5 to 20mm
Welded Pipe	OD: 5.0 - 1219.2 mm
Welded Pipe	Wall Thickness: 0.5 to 20mm
Wall Thickness	SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS Inconel UNS No 6600 Pipe supplier
Manufacturing techniques	Seamless / ERW / EFW/ Welded / Fabricated / CDW/ LSAW/ Seam-Welded / Redrawn
Pipe Dimensional	ANSI/ ASME B36.10, B36.19, B2.1

W.NR. 2.4816 Chemical Composition

Grade	C≤	Mn≤	Si≤	S≤	Cu≤	Fe	Ni	Cr
Inconel 600	0.15	1.0	0.5	0.015	0.5	6.0-10.0	72.0min	14.0-17.0

Inconel 600 Typical Physical & Mechanical Properties In Annealed Condition

Inconel 600	Alloy 600	70°F	200°F	400°F	600°F	800°F	1000°F
Density	lbs/in3	0.306	-	-	-	-	-
Thermal Expansion	X10-6/°F	5.8	7.4	7.7	7.9	8.1	7.7
Elastic Modulus	103 ksi	31.1	30.5	29.7	28.8	27.8	25.7
Poisson Ratio	-	0.327	0.319	0.312	0.307	0.301	-
Thermal Conductivity	Btu-in/h·ft2 ·°F	103	109	121	133	145	139
Specific Heat	Btu/lb·°F	0.106	0.111	0.116	0.121	0.126	0.118
Yield Strength	ksi	35	26	24	23	21	34
Tensile Strength	ksi	80	75	73	70	69	88

Key Features of Nickel Alloy 600 Pipe Include:

Corrosion resistance: including acids, alkalis and chlorides
High temperature strength: up to 2000°F
Oxidation resistance
Workability: hot workability and cold workability. Hot working should be performed above 1600°F (871°C). Cold working should be performed below 1200°F (649°C).

Inconel 600 Pipe Applications

Chemical Processing:
Petrochemical: Refineries and petrochemical plants
Power Generation: Steam and gas turbine components, heat exchangers, and boiler tubes in power plants.
Aerospace and Defense: Aircraft exhaust systems
Nuclear Industry

Inconel 600 Heat Treatment

Inconel 600 is a high-temperature alloy. The heat treatment process includes solution treatment (1093°C), quenching, and precipitation hardening treatment (982°C). Solution treatment eliminates intergranular phases, quenching prevents their regeneration, and precipitation hardening increases hardness and strength.