Alloy 601 Sheet
1. Standard: ASTM B168 / ASME SB168, ASTM B906 / ASME SB906
2. Width: 0~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.3~ 50mm or as per your requirements
5. Grades:Inconel 601, UNS N06601, WNR.2.4851
Alloy 601 sheet is designed for high-temperature and corrosive service environments. Inconel 601 features optimized carbon, manganese and silicon contents to enhance castability while retaining excellent mechanical and corrosion-resistant properties. HT PIPE supplies inconel alloy 601 plates in compliance with international standards, catering to industrial sectors requiring reliable performance under extreme conditions.
ASTM B168 alloy 601 Plate Product Specifications
Standard: ASTM B168, AMS 5549, Nickel Institute Specifications
Thickness: 0.2-80 mm
Width: 100-2600 mm
Length: 500-10000 mm (customizable)
Surface Finish: Mill finish, polished, sand-blasted (per customer request)
Delivery Condition: Solution annealed, pickled, annealed and polished
Inconel 601 sheet chemical composition
|
Element |
Minimum |
Maximum |
Typical |
|
Nickel (Ni) |
58.0 |
63.0 |
60.5 |
|
Chromium (Cr) |
21.0 |
25.0 |
23.0 |
|
Aluminum (Al) |
1.0 |
1.7 |
1.35 |
|
Manganese (Mn) |
- |
1.00 |
0.50 |
|
Carbon (C) |
- |
0.10 |
0.05 |
|
Copper (Cu) |
- |
0.50 |
0.20 |
|
Silicon (Si) |
- |
0.50 |
0.30 |
|
Sulfur (S) |
- |
0.015 |
0.008 |
|
Phosphorus (P) |
- |
0.020 |
0.010 |
|
Iron (Fe) |
- |
Balance |
Balance |
inco 601 plate Physical Properties
Density: 7.91 g/cm³ (0.286 lb/in³)
Melting Temperature: 1320-1370 °C (2408-2498 °F)
Thermal Conductivity: 14.4 W/(m·°C) at room temperature
Service Temperature Range: -200-1100 °C (-328-2012 °F), up to 1250 °C for short-term high-temperature exposure
alloy n06601 material Mechanical Properties (Solution Annealed Condition)
Tensile Strength: ≥585 MPa (85 ksi)
Yield Strength: ≥240 MPa (35 ksi)
Elongation: ≥30%
Hardness: 180 HBW (typical)
Fracture Toughness: High
Fatigue Strength: Stable at high temperature
Inconel N06601 steel sheet Core Performance Advantages
High-Temperature Oxidation Resistance: Aluminum content forms a dense alumina oxide film at high temperatures, resisting oxidation up to 1250 °C, suitable for high-temperature furnace components and thermal power equipment.
Corrosion & Carburization Resistance: Excellent resistance to oxidizing acids, alkaline solutions, and carburizing environments, widely used in petrochemical cracking units and heat treatment furnaces.
Structural & Mechanical Stability: Single austenitic structure, no phase transformation during service, maintains good toughness and strength at both low and high temperatures.
Weldability & Processability: Excellent weldability via conventional methods, readily machined after solution annealing, adaptable to complex component fabrication.
uns n06601 plate Industrial Sectors
Petrochemical & Chemical Industry: Cracking furnace tubes, reformer tubes, catalytic reactor components, and acid-resistant flanges.
Thermal Power & Nuclear Energy: Boiler superheater tubes, heat exchanger plates, and nuclear power plant high-temperature pipelines.
Metallurgical Industry: Furnace linings, heat treatment baskets, and molten metal handling equipment.
Aerospace & Automotive: High-temperature exhaust system components and engine heat shields.
Environmental Protection: Waste incinerator linings and flue gas treatment equipment.
FAQ
Q: About Alloy 601 Plate prices?
A: Prices from ranges $30 - $35 per kilogram, vary depending on size, wall thickness, supplier etc.
Q: How long does your delivery time take?
A: Delivery time is within 5-21 days
Q: Is There Sample Service?
A: Samples Are Provided Free Of Charge
Q: What Is The Minimum Order Quantity?
A: No Minimum Order Quantity
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer and is fixed with a fumigation wooden pallet.
Q: Exported Countries
A: Brazil, South Africa, Indonesia, India, Singapore, Malaysia, Iran, Russia, UAE, Chile, Laos, etc
Q: Can we visit your factory?
A: Of course, you are always welcome!
Hot Tags: alloy 601 sheet, China alloy 601 sheet manufacturers, suppliers
Previous
Inconel N06601 SheetYou Might Also Like
Send Inquiry