ASME SB 443 UNS N06625 Plate

ASME SB 443 UNS N06625 Plate


1. ASTM B443, ASME SB 443
2. Width: 0~2500mm
3. Length: 0~12m
4. Thickness: 0.3~ 50mm
5. Material Grade: Inconel 625, UNS N06625, Din 2.4856
Send Inquiry
Product Introduction

What ASME SB-443 Covers

ASME SB-443, identical in text to ASTM B443, covers Inconel 625 (UNS N06625) in plate, sheet and strip form. If your drawing quotes AMS 5599, that is the aerospace version of the same plate specification and one heat of plate can satisfy both. Bar, forgings and rings are not covered here: those are AMS 5666, with ASTM B446 as its counterpart.

 

Two numbers are worth keeping straight before you order. SB-443 / B443 governs the plate, and the annealed minimums are 415 MPa yield and 827 MPa tensile. AMS 5599 then adds aerospace heat-lot and traceability control on top, which is why a mill certificate that satisfies B443 may still fall short of an AMS 5599 drawing even though the alloy is identical.

 

The AMS and ASTM nickel alloy cross reference sets out AMS 5599, 5666, 5596, 5662, 5663, 5536 and 5643 against their ASTM counterparts and states which product form each one actually covers. Related stock: Inconel 718 plate and Hastelloy X plate.

 

ASME SB 443 UNS N06625 Plate is a nickel-based high temperature alloy, a nickel-chromium-molybdenum alloy with the addition of niobium, which has excellent oxidation resistance under a wide range of corrosive conditions. The alloy has high strength and toughness in the temperature range from cryogenic to 1100°C. Inconel 625 also has excellent fatigue resistance. The alloy's non-magnetic properties stem from the strengthening effect of Mo and Nb on its Ni-Cr matrix.

 

ASME SB-443 is the ASME counterpart to ASTM B443, covering Inconel 625 (UNS N06625) plate, sheet, and strip. This page lists our current stock range plus the standard composition and mechanical properties per the specification. We are a supplier of Alloy 625 with 15+ export experience, contact us for more information and free quotes!

 

2.4856 Inconel 625 Plate Applications:

  • Chemical Industry
  • Thermal and Nuclear Power Plants
  • Fertilizer Plants
  • Aerospace
  • Paper Industry
  • Oil and Gas Exploration
  • Desalination Plants
  • Pharmaceutical Plants
ASME SB 443 UNS N06625 Plate

 

Specification ASME SB 443 UNS N06625 Plate Sheet / Plate

ASTM ASTM B443 / ASME SB 443
Standard MSRR, AMS, BS
Length & Sizes 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Plate, Sheet, Coils, Foils, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Shim, Blank (Circle), Hot Rolled, Cold Rolled, Annealed
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.

Contact now

Mechanical Properties of Inconel 625 Sheet

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

 

Material Equivalent of ASME SB443 UNS N06625 Coil

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M --75---- NCF 625

 

ASTM B443 UNS N06625 Plate Metric Dimensions

Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524

 

Inconel 625 Plate Applications

  • Chemical Industry
  • Thermal and Nuclear Power Plants
  • Fertilizer Plants
  • Aerospace
  • Paper Industry
  • Oil and Gas Exploration
  • Desalination Plants
  • Pharmaceutical Plants

 

Why Choose Us?

  • Test Reports
  • Raw Material Certificates
  • EN 10204/3.1B
  • 100% Radiographic Inspection Reports
  • SGS Third Party Inspection

 

Tests We Perform:

  • Mechanical Inspections such as Tensile, Elongation and Reduction of Area
  • Chemical Inspections - Spectroscopic Analysis
  • Pitting Protection Tests
  • X-Ray Testing
  • Impact Analysis
  • Eddy Current Inspections
  • Hydrostatic Analysis

 

FAQ

Q: About ASME SB 443 UNS N06625 Plate prices?

A: Prices from ranges $25 to $35 per kilogram, vary depending on size, wall thickness, supplier etc.

Q: How long does your delivery time take?

A: Delivery time is within 5-21 days

Q: Is There Sample Service?

A: Samples Are Provided Free Of Charge

Q: What Is The Minimum Order Quantity?

A: No Minimum Order Quantity

Q: How to pack the products?

A: The inner layer has a waterproof paper outer layer and is fixed with a fumigation wooden pallet.

Q: Exported Countries

A: Brazil, South Africa, Indonesia, India, Singapore, Malaysia, Iran, Russia, UAE, Chile, Laos, etc

 

 

Hot Tags: asme sb 443, astm b443, uns n06625, inconel 625 plate, ams 5599, ams 5666, 625 plate specs

Send Inquiry

whatsapp

Phone

E-mail

Inquiry