Inconel Alloy 601 Sheet

1. Standard: ASTM B168, ASME AB 168
2. Material Grades: alloy 601, UNS N06601, Din 2.4851
3. Width: 0~2500mm or as required
4. Thickness: 0.3~ 1200mm or as required
5. Process: Hot Rolled, Cold Rolled

Send Inquiry

Product Introduction

Inconel alloy 601 sheet stands out for its excellent high temperature strength and corrosion resistance. It can operate in continuous high temperature environments, up to 1,371°C (2,500°F). Alloy 601 UNS N06601 has excellent resistance to strong acids, strong alkalis and oxidizing environments at high temperatures. Its relatively low coefficient of thermal expansion helps reduce thermal stress under high temperature conditions. Our company is an Inconel 601 supplier with 15+ export experience. Contact us for more information and quotes for free!

Inconel Alloy 601 Suppliers ASTM Standard:

ASTM B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet

Suppliers: We offer Inconel round bar, plate, sheet, strip, pipe, tube, fittings, flanges, forgings.

Inconel Alloy 601 Sheet UNS N06601 Plate

Tolerances on Thickness Of Nickel Inconel Alloy 601 Sheet

Alloy 601 Sheet	Tolerance over and under nominal thickness t (mm)
Width w (mm)	2.5	4.5	6.0	8.0	10.0	12.5	16.0	20.0	25.0	30
w < 1200	0.20	0.23	0.3	0.32	0.35	0.8	0.8	0.8	1	1.4
1200< w <1500	0.2	0.25	0.3	0.35	0.38	0.8	0.8	0.9	1	1.4
1500< w <1800	0.2	0.28	0.32	0.38	0.4	0.8	0.8	0.9	1.1	1.5
1800< w <2100	0.20	0.30	0.36	0.40	0.45	0.80	0.80	0.90	1.1	1.5
2100< w <2400		0.8	0.8	0.8	0.8	0.8	0.9	1	1.1	1.5
2400< w <2700		0.8	0.8	0.8	0.8	0.9	1	1.1	1.3	1.7
2700< w <3000		0.8	0.9	1	1	1	1.1	1.3	1.4	1.8

Alloy 601 Chemical Composition:

Nickel (Ni): about 58.0 - 63.0%
Chromium (Cr): about 21.0 - 25.0%
Aluminum (Al): about 1.0 - 1.7%
Iron (Fe): about 13.0 - 16.0%
Silicon (Si): about 0.5%
Sulfur (S): about 0.015%
Carbon (Cr): about 0.10%
Molybdenum (Mo): about 1.0 - 1.7%

Inconel 601 Mechanical Properties Data Sheet:

Tensile strength: up to 550 MPa (80,000 psi).
Yield strength: The yield strength is about 300 MPa (43,500 psi).
Elongation: The elongation is typically 30%.
Coefficient of thermal expansion: The coefficient of thermal expansion is relatively low

Hot Rolling, Cold Rolling Production Process:

Inconel 601 alloy plate can be produced by cold rolling or hot rolling process.

Cold rolling is usually used to produce thinner plates
Hot rolling is used to produce thicker plates
Both processes go through multiple processes, including heating, rolling, annealing, etc.