ASTM B127 MONEL 400 Sheet

1. Standard: ASTM B127, ASME SB127
2. Width: 0~2500mm or as per your requirements
3. Length: 0~12m or as per your requirements
4. Thickness: 0.1~ 50mm or as per your requirements 5. Grades:Monel 400,alloy 400,UNS N04400, en 2.4360

Send Inquiry

Product Introduction

Monel 400 Sheet and ASTM B127 Alloy N04400 Plate Strip Manufacturer in China

MONEL 400 Sheet is a solid solution strengthened nickel-copper alloy containing 67% nickel and 30% copper, supplied in the annealed condition. The higher nickel content in Alloy 400 provides excellent resistance to chloride stress corrosion cracking. EN 2.4360 is also used to withstand temperatures up to 800 degrees Fahrenheit, so it can be used in seawater applications and high temperature steam components. UNS N04400 is also a highly ductile alloy that exhibits good tensile strength and hardness properties even at sub-zero temperatures.

ASTM B127 Alloy N04400 Applications:

Heat Exchangers
Petroleum
Valves and Pumps
Marine Installations
Chemical Processing
Gasoline, Fresh Water Tanks

Nickel Monel Alloy 400 Plate Sheet Specifications

Specification	ASTM B127/ ASME SB127, AMS 4544
Dimensions	Cold rolled Alloy 400 Plate 0.5-6.4 mm Hot rolled Alloy 400 Plate 3.0–10.0 mm
Length	2.44m, 2m, 3m, or as required
Width	10mm to 2500mm
Thickness	0.1mm to 100 mm Thick
Variety	Strip, Sheet, Plate, Foils, Coils, Flats, Plain Sheet, Rolling Plate, Rolling Sheet
Hardness	Hard, Soft, Quarter Hard, Half Hard, Spring Hard
Finish	2B, BA NO (8), 2D, Hot rolled plate (HR), Cold rolled sheet (CR), 1D, No.1 finish hot rolled, BA, No.4, hairline, 8K, mirror, brush etc.