ASME SB 626 N10276 Welded Tube

1.Standard: ASTM B626, ASME SB 626
2.OD: 1/2″NB – 48″NB
3.Thickness: SCH5~SCHXXS
4.End: Beveled End, Plain End

Send Inquiry

Product Introduction

ASME SB 626 N10276 Welded Tube is a nickel-based alloy, has excellent corrosion resistance in acidic, alkaline and oxidizing media and can be used to handle various corrosive media. EN 2.4819 has good oxidation resistance, can operate stably under high temperature and pressure, and is suitable for high temperature processes. The "welded" designation indicates that the tubing is manufactured through a welding process rather than being seamless.

ASTM B626 UNS N10276 Welded Nickel Alloy Tube Application:

Chemical industry
Oil and Gas Industry
Energy Industry
Marine Engineering

Specification Chart Of Hastelloy C276 UNS N10276 Tube

Size	6.00 mm OD up to 914.4 mm OD
Thickness	0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
Length	Within 13500mm
Type	Welded Pipes, Welded Tubes

Mechanical Strength Table Of ASTM B626 Hastelloy C276 Welded Tube

Density	8.89 g/cm3
Melting Point	1370 °C (2500 °F)
Yield Strength (0.2%Offset)	Psi – 52,000 , MPa – 355
Tensile Strength	Psi – 1,15,000 , MPa – 790
Elongation	40%

ASTM B626-19 Standard

Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

Welded Pipe Fabrication Process:

ASME SB 626 N10276 Welded Tube is manufactured using high-quality welding processes, including resistance welding, TIG welding and plasma welding, to ensure the quality and uniformity of the welds on the pipe. During the manufacturing process, welding parameters and process flow are strictly controlled to ensure that the quality and performance of the pipe meet standard requirements.