AISI 321H 1.4878 Steel Plate

1.Standard: ASTM A240、ASME SA240
2.Thickness: 0.1mm - 50mm
3.Width: 100 - 2000mm
4.Length: 1000 - 12000mm Customer's Requirement

Send Inquiry

Product Introduction

AISI 321H 1.4878 steel plate is a stabilized austenitic stainless steel high temperature corrosion resistant material. As an austenitic stainless steel containing titanium, ASTM A240 S32109 stainless steel plate can effectively resist intergranular corrosion at high temperatures. DIN 1.4878 material exhibits excellent oxidation resistance at temperatures up to 900°C. Compared with 321, Alloy 321H has better strength and creep properties at high temperatures due to its higher carbon content.

ASTM A240 Type 321H Plate Application areas:

Chemical industry
Reactors, heat exchangers
Oil and gas industry
Power plants
Boilers and Heat Exchanger Components
Aerospace

Alloy 321H Stainless Steel Sheets Specification

Specifications	ASTM A240 / ASME SA240 EN 1.4878 Hot and Cold Rolled Sheet
Type	ASTM A 240 TP 321H SS Sheets
Thickness	Cold rolled ASTM A240 321H Plate : 0.5-6.4 mm Hot rolled SS A240 321 Plate : 3.0–10.0 mm 321H Stainless Steel Sheet : 0.01~200mm
Size	1000 mm x 2000mm, 1220mm x 2440mm, 1250mm x 2500mm, 1500mm x 3000mm, 2000mm x 4000mm, Etc.
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Specialized in	Shim Sheet, Perforated Sheet, B. Q. Profile.
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats

ASTM A240 Gr 321 / 321H SS Sheet Chemical Composition

Grade	SS 321	SS 321H
C	0.08 max	0.04 - 0.10
Mn	2.0 max	2.0 max
Si	1.0 max	1.0 max
P	0.045 max	0.045 max
S	0.030 max	0.030 max
Cr	17.00 - 19.00	17.00 - 19.00
N	0.10 max	0.10 max
Ni	9.00 - 12.00	9.00 - 12.00
Ti	5(C+N) - 0.70 max	4(C+N) - 0.70 max

DIN 1.4878 Stainless Steel Mechanical Properties

Density	8.0 g/cm3
Melting Point	1457 °C (2650 °F)
Tensile Strength	Psi - 75000 , MPa - 515
Yield Strength (0.2%Offset)	Psi - 30000 , MPa - 205
Elongation	35%