-
Oct 15, 202615-5PH Stainless Steel Pipe & Plate | UNS S15500 | HT PIPE15-5PH (UNS S15500 / XM-12) seamless pipe to ASTM A511 and plate to AMS 5862. Aging H900–H1150, higher transverse toughness than 17-4PH. Quote in 24h. -
Oct 15, 2026Alloy 904L (UNS N08904): The 4.5% Molybdenum Super AusteniticAlloy 904L (UNS N08904, 1.4539) super austenitic stainless guide: chemistry, 490 MPa tensile, sulfuric and phosphoric acid resistance, ASTM B677 pipe and B625 plate specs and appli -
Oct 14, 2026Stainless Steel Pipe vs Tube: The Specification Differences That Change the P...Stainless steel pipe vs tube explained: NPS and schedule sizing, OD x wall tube sizing, ASTM A312 vs A269, dimensional tolerances and the enquiry fields that prevent specification -
Oct 13, 2026Pipe Spool Fabrication: Dimensional Tolerances, Welding and the RFQ Data That...Pipe spool fabrication guide: ASME B31.3 dimensional tolerances, flange bolt-hole rotation, weld shrinkage, inspection and RFQ data. Custom prefabricated spools in stainless, duple -
Oct 12, 2026Pipe End Preparation: Bevel Types, Tolerances and the Fit-Up That Decides Wel...Pipe end preparation explained: single V, double V, U and J bevel types, land and gap tolerances, machining methods and the fit-up checks that decide weld quality before the arc. -
Oct 12, 2026Inconel 718 Pipe (UNS N07718): Precipitation Hardening, AMS 5663 and the Serv...Inconel 718 pipe (UNS N07718, 2.4668) is a precipitation-hardenable Ni-Cr-Fe alloy: 1276 MPa min tensile per AMS 5663, strong from cryogenic to 650 C. Seamless pipe NPS 1/2-6, EN 1 -
Oct 10, 202617-4PH Stainless Steel Plate & Bar (UNS S17400) SupplierBuy 17-4PH (UNS S17400 / Type 630) stainless steel plate and bar in H900 to H1150D. Full heat treatment comparison, specs, equivalents and same-day quote. -
Oct 10, 2026Weld Neck vs Slip-On Flange: What Each Connection Is Built ForWeld neck vs slip-on flange compared under ASME B16.5: hub geometry, weld type, pressure class, fatigue and crevice behaviour, plus the buying checklist to pick the right flange fo -
Oct 09, 2026Inconel 601 Pipe (UNS N06601): The High-Temperature Oxidation Workhorse Expla...ASTM B167 Inconel 601 pipe (UNS N06601) resists oxidation to 1150 C, ideal for furnace radiant tubes and heat treatment fixtures, supplied annealed with mill certificates. -
Oct 08, 2026Concentric vs Eccentric Reducer: Which One Belongs on Your LineConcentric vs eccentric reducer under ASME B16.9: centreline geometry, drainage and venting rules, pump suction and steam line practice, plus the buying checklist to select the rig -
Oct 06, 2026Hydrochloric Acid Alloy Selection: B-3 vs C-276 vs Lined SystemsWhich alloy survives hydrochloric acid: Hastelloy B-3 vs C-276 behavior in HCl, lined carbon steel economics, zirconium and the selection checklist for reducing service. -
Sep 30, 2026Hastelloy C276 Pipe Wall Thickness: Running the ASME B31.3 CalculationHastelloy C276 pipe wall thickness per ASME B31.3: the pressure term, the corrosion allowance that owns the schedule, temperature behaviour and the seamless vs welded E-factor deci





